Description
This actuator is configurable to meet many applications; options include potentiometer, IP65 Ingress protection and 5 different gear ratios. Linear actuators are gear-driven drive motors that extend the shaft with 107 lbs. of force and have a 500 lb static load. Our actuators are compatible with our remote control systems and switches, allowing for custom installation and operation in countless applications. With built-in limit switches & ACME drive system they are ideal for automotive applications.
The potentiometer allows you to preset specific stopping points with the actuator’s line of travel. Using our controller, you can pre-set up to three specific stopping locations.
| Part Number | CWLACT2 | CWLACT4 | CWLACT6 | CWLACT8 | CWLACT10 | CWLACT12 |
| Input Voltage | 12VDC | |||||
| Max Push/Pull | 110 lbs | |||||
| Static Load | 500 lbs | |||||
| No Load Speed | 0.59 in/sec | |||||
| Max Load Speed | 0.39 in/sec | |||||
| Stroke Length | 2.16″ | 4.01″ | 5.90″ | 7.93″ | 10.00″ | 11.96″ |
| Retracted Length | 6.36″ | 8.13″ | 10.10″ | 12.07″ | 14.03″ | 16.00″ |
| Extended Length | 8.52″ | 12.19″ | 16.00″ | 20.02″ | 24.01″ | 27.97″ |
| Duty Cycle | 20% | |||||
| IP Grade | IP 65 – Totally protected against dust. Protected against low pressure water jets if water from all directions. Limited ingress permitted. | |||||
We have additional linear actuator sizes, mounting brackets and controllers available.
